A V-TEC steel feed wheel for John Deere/Waratah H290 and H219 harvester heads Technical specificationsMeasurements547x547x380 mmMounting5 boltsWeight78 kgLeft and right wheel identicalProduct code (SKU)VTJD-290Spare part codeF722315High quality V-TEC feed wheel designed with customer feedback in mind and it's structure is patented. V-TEC scraper John Deere H219/H290 Add to cart Accessories Uniquely designed and listening to user feedbackDevelopment work by MenSe Oy on the durable V-TEC feed wheel John Deere H290/H219 was accomplished by listening to feed roller users and grab designers. The development work has resulted in a new solution, the V-Tec roller, which has even better grip and is cleaner. At the same time, damage to the wood surface is reduced.Comparing the V-TEC to standard feed wheels and showcasing its unique capabilities.User experiences of the V-TEC feed wheelJohn Deere H413 V-TEC "You have really succeeded with the V-TEC feed wheels. They work perfectly in multi-tree processing and roll smoother than rubber-coated steel wheels. So we are really satisfied!" Jocke Larsson, Per-Hans Skogsentreprenad ABPonsse H6/H7/H8 V-TEC "We bought our first V-tec feed wheels in September 2019. We have also used original feed wheels occasionally. Our logging sites in Ilomantsi are mainly in Finnish swamps. The average diameter of the trees is only 120cm. They are long and "thin" trees. The feed wheels have accumulated more kilometers in terms of distance than on the thickest sites. When you do windthrow logging under the snow, the feed wheels are exposed to, for example, contact with rocks due to the motion range of the grapple. The V-TEC feed wheel is easy to maintain. The worn blade could be sharpened to its former state even in the forest. The open structure of the feed wheels prevents them from clogging, which is a plus. Reversing is also successful. So, I will order new V-TEC feed wheels for the Scorpion on March 31, 2021"Jarmo Sorsa, Metsä-ja Maansiirto Kastinen OyPonsse H6/H7/H8 V-TEC "Incredible grip. The most noticeable difference compared to previous wheels is that the tops go through intact. Feeds well forwards and backwards. Makes calibration (pruning) easier because the surface of the wood remains smooth compared to spiked wheels."Eero SantajokiPonsse H6/H7/H8 V-TEC "Intelligent ones! Compression pressure can be dropped intelligently, 90 reduced to 70. The feed speed increased. It immediately picks up the wood. Only small marks remain on the tree = does not break the bark. I liked it!! Not noisy. Goes smoother than the previous spike rollers. It's silly to be stingy with the rollers. The money was not wasted."Reijo Pulkkinen, Pulkkinen Forest OyPonsse H6/H7/H8 V-TEC Timo Kinnunen, Tapiolan Kone Oy Nisula 500H V-TEC Esa Nissinen, Koneurakointi Esa NissinenPonsse H6/H7/H8 Multi-Tree V-TEC "I often have projects where I process both energy wood and timber at the same time. The V-tec multi-tree wheel works well for both. It would be difficult if I had to change wheels when working with different qualities. When comparing the V-tec to other feed wheels I have used before, the GRIP is very good when operating at normal pressures. They don't slip. In our area in Northern Savonia, the spruce trees are lush and especially the tops are difficult to handle. I got frustrated with regular wheels getting clogged. V-tecs never lose grip and they also don't get clogged. At first, I was afraid that the sharp spike of the V-tecs could cause damage to the logs. The deflection has been measured and it was not a problem. The spikes touch the trunk over a large area, so it doesn't sink into the wood. The wood is not blocked if the V-tec causes damage to it."Jani Taskinen, Metsätyö Taskinen OyPonsse H6/H7/H8 V-TEC "Since 2017, we have been using V-Tec feed wheels in Ponsse's 5, 6, and 7 harvester heads. The contractor complained about the damage caused by so-called sea pine spikes. At that point, we decided to test MenSe's V-tec wheels, which were still in the development phase. In collaboration with the manufacturer, we made fine adjustments to them. The contractor measured the deflections and approved the work result. Compared to the spike and so-called standard straight rib feed wheel, we have noticed that the traction of the V-tec wheel is excellent. There is no slippage with V-tec wheels. The standard wheels slip at the base of the pine tree and cannot be driven twice because the surface is damaged. In short, the advantages of V-tec from our perspective: Traction, reverse capability, can be driven from both sides = wheels are reversible and do not cause harvesting damage."Risto Kotola, Urakointi R & M KotolaKomatsu C93 V-TEC "I should've ordered these two years ago. Huge difference on grip and performance. One hell of a change - Power increased - Winding trees goes through smoothly - Harvester head is more silent - Able to decrease gripping pressure - Excellent grip - Big or small trunks without a problem - Cheap price - Seals do not freeze (open structure prevents water from accumulating)"Takkala YrjöV-TEC Komatsu 350, C93 and Kesla 18 and 25 harvester heads "Overall, we've been satisfied with the V-TEC units. During reverse feeding the stem stays well seated in the throat. In the felling cut the V-TEC positions itself on the stem and centers the stem well on the harvester head. Sharpening is easy: once a year with a grinding wheel, producing a clear cutting edge. We have V-TEC experience on Komatsu 350, C93 and Kesla 18 and 25 harvester heads. "These rollers are among the best," says entrepreneur Antti Ylikoski." AS Ylikoski – KannusAS YlikoskiPonsse H6/H7/H8 V-TEC "These feed wheels provide new features for the grapple. Excellent grip. Pine bark passes through the fingers and the grip is maintained. Working with birch became easier and making tree tops is done better. The biggest difference was noticed when working with big trees and birch. These will also be used in the future."Metsäkoneurakointi P. Mikkonen OyPonsse H6/H7/H8 V-TEC "MenSe's service is fast. We already have V-tec feed wheels in several machines. We have liked these wheels. We got a new machine now and immediately switched to V-tec. V-tec cleans well. Bark does not accumulate. Interlaced ribs center the trunk upwards, it does not fall down. The wheels center the trunk to the bottom of the grapple. Good traction. No slipping. Does not damage the surface, so no harvesting damage. All wheels wear out over time. They are not eternal. However, V-tec wheels can be sharpened/restored, so the lifespan increases. In addition, Ponsse 6-8 Vtec can be reversed. The outer spikes are new twice." Halkia, PornainenMetsäkoneurakointi Panu Valdén John Deere H415/H425 Black Bruin V-TEC Wide Seppo Pulkkinen, Metsänkorjuu Pulkkinen OyPonsse H6/H7/H8 V-TEC "We have had two years - about 5000h V-tec feed wheels on Ponsse. They have held up well. I initially lowered the compression pressure by 10 bars. Good traction. Sharp and easy to sharpen with a grinder. There is no going back to spike rollers. I also want V-tec feed wheels for another machine. We also do some multi-tree handling. Occasionally, branches get caught on the sharp edge spikes of the V-tec feed wheel. Perhaps I will purchase V-Tec multi-tree wheels for these work sites."Pasi Toivonen, PT-ForestJohn Deere H413 V-TEC
